How is the daily maintenance of aluminum boats?

I will tell you how to do the usual maintenance and maintenance of the aluminum boat.

Here is the content list:

l What maintenance should be done to make it last longer?

l How to maintain the parts of the aluminum boat?

l How to do anti-corrosion treatment for aluminum boats?

What maintenance should be done to make it last longer?

The first thing to look at is the wearing parts, such as the submersible pump, the hardware on the impeller, the retaining ring, the bushing, and the bearing seat. It is recommended to remove these accessories on the aluminum ambulance boat during maintenance and check whether there is any defect. The parts in question must be replaced in time to prevent safety problems. Check again to see if the grease protection layer on the hardware is still there. If it is not, it must be applied in time. The grease protection layer can resist seawater clothing and increase the gloss, which will make future maintenance easier. If some parts need to be welded, it is necessary to properly protect the welding periphery to prevent splashing. In addition, check whether the bottom of the aluminum boat is scratched or damaged. If there is any, deal with it in time, and send it to the repair shop for an explanation that cannot be solved by yourself.

How to maintain the parts of the aluminum boat?

Although the hardware components on the aluminum boat are very inconspicuous, these inconspicuous hardware components often play a big role in the use of the aluminum boat. And it is often easy to encounter harsh environments at sea, so it can be said that it is very important to regularly maintain these hardware components on the aluminum fishing boat. First of all, check the impeller, retaining ring, bushing, and bearing seat of the submersible pump in the aluminum boat, which is extremely fragile hardware. Under normal circumstances, we need to remove the water pump and carefully check whether such wearing parts are still intact. Then it is necessary to use better grease to coat the surface of these hardware parts with a grease protection layer, which can not only resist corrosion but also add gloss to the aluminum boat, and also make future maintenance easier. Under normal circumstances, to make the aluminum boat have a longer service life, the aluminum boat is often rusted.

How to do anti-corrosion treatment for aluminum boats?

How to do anti-corrosion treatment for aluminum boats is believed to be a concern of many friends. If aluminum boats want to be used for a long time, daily maintenance work must be done. Once there is a problem, it will reduce the use time of the boats. Then, how does an aluminum houseboat work? Do a good job of anti-corrosion treatment? One of them is the well-known sacrificial anode protection method. In short, it uses the corrosion of the anode to protect the cathode and slow down the corrosion rate of the cathode. However, in the selection, we should pay attention to some metals that are not too active, otherwise, it will be easy to lead to accelerated corrosion. Another method is to use spray anti-corrosion materials. Since the hull and bottom of the aluminum boat are different in corrosion, the materials used when spraying this material are also different. The same anti-corrosion measures cannot be used on water and underwater. , which is also a kind of protection for the aluminum boat.

If you are engaged in aluminum boat-related work or want to know more about our company, you can communicate with us on the website, our official website is https://www.yamaneboat.com/. Our cost-effective products are well received by everyone.